|
| |
|
Designed for medium to high traffic docks where positioning is unusual or requires more flexibility, allows varying light head angles as needed. Available in 40”, 60”, & 90” lengths.
- Chip resistant powder coat finish
- 1-1/2” square, 14 gauge, steel tubing
- 8’ long, 300v SJTW conductor cord and NEMA 5-15 grounded plug
- (2) 3-1/4” x 1-3/4” x 3/16” mounting plates allow arm to be mounted with four 3/8” anchor bolts
- Adjustable arm knuckle joints allow vertical and horizontal adjustment
|
|
| |
|
A light duty dock light arm intended for limited use. Provides up to 300° horizontal and vertical movements from the joint. Not suitable for heavy lamp heads or fans. Available in 40” & 60” lengths.
- Chip resistant powder coat finish
- 1-1/2” square, 14 gauge, steel tubing
- 8’ long, 300v SJTW conductor cord and NEMA 5-15 grounded plug
- (2) 3-1/4” x 1-3/4” x 3/16” mounting plates allow arm to be mounted with four 3/8” anchor bolts
- Adjustable arm knuckle jounts allow vertical and horizontal adjustment
|
|
| |
|
An industry standard the dual strut arm has the highest strength of all the arms, offering 300° of horizontal movement at the joint. Available in 40”, 60”, & 90” lengths.
- Chip resistant powder coat finish
- 1-1/2” square, 14 gauge, steel tubing
- 8’ long, 300v SJTW conductor cord and NEMA 5-15 grounded plug
- (2) 3-1/4” x 1-3/4” x 3/16” mounting plates allow arm to be mounted with four 3/8” anchor bolts
|
|
| |
|
A standard model arm suitable for most applications. limited range of positions.
- Chip resistant powder coat finish
- 1-1/2” square, 14 gauge, steel tubing
- 8’ long, 300v SJTW conductor cord and NEMA 5-15 grounded plug
- (2) 3-1/4” x 1-3/4” x 3/16” mounting plates allow arm to be mounted with four 3/8” anchor bolts
|
|
| |
|
Standard modular arm with the flexibility of heavy duty impact absorber designed to withstand impacts from forklifts and loading dock doors.
- 1 1/2", 14-gauge
- Square steel tubing
- Outer arm adjusts 300 degrees horizontally and 210 degrees vertically
- Light head will swivel 300 degrees
- all swivel joints use nylon and steel washers for long wear and smooth operation
- Rubber enclosed shock absorber mounted to forward arm
- Mounting Bracket: 1/8" thick steel bracket, with four (4) mounting holes to accept 3/8" bolts (not supplied).
|
|