Truck Dock Bumper.
American Made
12" thick x 10" high x 24" wide.

HomeDock BumpersExtra Thick Dock Bumpers

Dock Bumper Model: B1210-24

All measurements +/- 1/8"

Application - Uses

• Loading docks with declining slopes
• Docks with slopes of 8% or less

Benefits

• Prevents over compression of dock seals
• Protects buildings when docks slope towards the building
• Absorbs over 80% of truck impact and shock to protect dock and building
• Eliminates costly repairs from severe shock to docks
• Anchored through thick steel angles to provide stability and shape retention
• Performs on any truck dock under any weather condition or prolonged exposure
• Maintenance free

Specifications

1. Furnish and install rubber dock bumpers as manufactured by Durable Corporation. Model No(s)______. Resilient rubber material of bumpers shall be rubberized-fabric truck tires cut to uniform size pads and punched to receive 3/4" supporting rods.
2. All bumpers must be 12" thick (projection from dock), and closed with two 3" x 3" x 1/4" structural angles under approximately 1,500 lbs of pressure. The angles are welded to 3/4" rods at one end and closed with threaded rod and nut at the other end.
3. The anchor leg of angle extends a minimum of 3" beyond the rubber surface at either end and contains two or three 13/16" anchor bolt holes as required. (Anchor bolts are supplied separately.)
4. The finish for exposed metal parts shall be either chrome aluminum lead-free enamel, or hot dipped galvanized. (Galvanized has additional cost.)
5. Bumper to hold dimensions of 24 x 12 x 10 (LWH) - bumper rubber dimensions to be 12 x 10 x 20 (WHL) - Bumper metric dimensions to be 609mm x 304mm x 254mm (LWH)

10" High x 24" Long x 12" Thick

Wedge Anchors sold separately.