Dock Bumper Model: B10520-11

Application - Uses

• Loading docks with declining slopes
• Docks with slopes of 7% or less

Benefits

• Prevents over compression of dock seals
• Protects buildings when docks slope towards the building
• Absorbs over 80% of truck impact and shock to protect dock and building
• Eliminates costly repairs from severe shock to docks
• Anchored through thick steel angles to provide stability and shape retention
• Performs on any truck dock under any weather condition or prolonged exposure
• Maintenance free

Specifications

1. Furnish and install rubber dock bumpers as manufactured by Durable Corporation. Model No(s)______. Resilient rubber material of bumpers shall be rubberized-fabric truck tires cut to uniform size pads and punched to receive 3/4" supporting rods.
2. All bumpers must be 10.5" thick (projection from dock), and closed with two 3" x 3" x 1/4" structural angles under approximately 1,500 lbs of pressure. The angles are welded to 3/4" rods at one end and closed with threaded rod and nut at the other end.
3. The anchor leg of angle extends a minimum of 3" beyond the rubber surface at either end and contains two or three 13/16" anchor bolt holes as required. (Anchor bolts are supplied separately.)
4. The finish for exposed metal parts shall be either chrome aluminum lead-free enamel, or hot dipped galvanized. (Galvanized has additional cost.)
5. Bumper to hold dimensions of 11 x 10.5 x 20 (LWH) - bumper rubber dimensions to be 10.5 x 20 x 11 (WHL) - Bumper metric dimensions to be 279mm x 266mm x 508mm (LWH)

20" High x 11" Long x 10.5" Thick

Wedge Anchors sold separately.