Loading Dock Equipment - Clear PVC Roll 12 Inch x .110, 150 feet

Stocking Locations
10 Stocking
Locations
BBB Logo

Clear PVC Roll 12 Inch x .110, 150 feet - Ribbed

Picture may not reflect the correct width.

Reg. Price:	~~$0.00~~
Sale Price:	$0.00
Save:	$0.00

Back Add to cart

Quantity

Add to cart

12" wide x .072" x150 ft. long
Standard clear ribbed
PVC material Bulk Roll

Details:

Home Strip Doors Bulk PVC

Our special ribbed style strip material is top quality pvc with rounded edges and off-set ribs. This roll features 12" ribbed clear strip material, 150 feet in length.

Standard Compound
Physical property data for pvc strip material

Property	Standard	Units	Standard	Description
Light Transmittance	ASTM D 1003	%	85	Visible light rate transmitted through the Strip material
Shore A Hardness	EN ISO 868	Sh A	80	Index based on a flat indenter's penetration depth. Scale from 0 (Soft) to 100 (Hard)
Tearing Resistance	DIN 53515	N/mm	50	Minimum tensile stress required to tear a pre-splt sample
Tensile strength at break	ASTM D 638EN ISO 527	N/mm²	16	Maximum tensile stress that a material can be subjected to before break
Elongation at break		%	340	Elongation of the specimen at the break point under tensile stress
Residual Elongation(After break)		%	68	Permanent elongation of the specimen measured after rupture in a tensile test
Thermal conductivity	ASTM C 177	W/m.K	0.16	Ability to conduct heat. The lower it is, the more insulation
Cold Bend Brittle Temp.	ISO 8570	°C	-35	Temperature at which the specimen break under torsion stress. Brittle point (CLASH & BERG)
Min usage temp	EN1876	°C	-15	Temperature range where material keep its mechanical properties (flexibility)
Max usage temp	EN1876	°C	(+50)
Vicat softening temp.	EN ISO 306	°C	50	Temperature at which the specimen is penetrated to a depth of 1mm by a 1kg flat indenter of 1 sq. mm
Specific heat capacity	ISO 11357	KJ/Kg.K	1.6	Heat energy required to increase the temperature of one kilogram of the material by one degre celsius
Sound Reduction	DIN 52210	dB	>35	Average sound level (freq 0.1 to 3.2 kHz) decreased by a 1.76 sq.m. and 5 mm thick PVC curtain
Reaction to fire	EN 1598	Class	-	Standard classification of material self-extinguishing and resistance to combustion
Reaction to fire	EN 13501-1:2007	Class	-	Standard classification of material self-extinguishing and resistance to combustion
UV/IR filter	EN 1598 &ISO 25980	-	-	Ability to filter welding rays allowing the use of this material as welding protection screen
UV resistance	ISO4892	-	Yes	Ability to resist to UV (sun, welding arc)
Surface Resistivity	ASTM D257	.1010Ω/?	30	Material surface resistivity measured with a 100 V direct voltage
Water absorption	EN ISO 62	%	-.0.2	Material mass variation after exposure to humid conditions (<0 if released / >0 if absorbed)
Anti-insect	-	-	No	Special ability to keep insects away (Food processing plants, tropical regions)
Density	ASTM D 792	g/cm³	1.22	Mass per unit volume

Data is based on current knowledge of products concerned.
This information is given to customers in good faith to inform and help in search, this does not constitute any formal implicit guarantee as to its use.

Ask About
Quantity Discounts
Monday-Friday
9 am - 6 pm EST

Call the Experts!
+1 (800)741-1258

Get A Quote

Electric Trailer Restraint Lock & Load

Reg. Price:	~~$5,800.00~~
Sale Price:	$4,448.00
Save:	$1,352.00

Electric Trailer Restraint
More than 38,000 lbs. of Restraining Force
9" - 30" Operating Range

Pit Leveler Brush Seal Kit

Reg. Price:	~~$100.00~~
Sale Price:	$75.00
Save:	$25.00

Pit Leveler Seal Brush Seal Kit
7' mechanically fastened sections with 1.5" brush
Aluminum Hardware
Seals all sides

Molded Dock Bumper Type DB-13

Reg. Price:	~~$55.20~~
Sale Price:	$32.84
Save:	$22.36

DB-13 Molded Dock Bumper
4" Thick x 10"High x 13" Long

Molded Bumper Type R

Reg. Price:	~~$66.40~~
Sale Price:	$39.50
Save:	$26.90

4" Thick x 12"High x 13" Long
Type R Bumper
Edge of dock leveler bumper

Contact Us

Products

Helpful Links