The SG30 LED Style Stop And Go Lights consist of an SG20 (control unit) and an SG10 (drone unit) linked via a communication cable with internal flashing circuitry. Flipping the switch on the control unit will cause either the red or green lamp to flash on the control unit and the opposite to flash on the drone unit. The user is responsible for providing a power supply to the control unit and attaching the 6' communication cable to the drone unit. Choose between 12v, 24v, and 115v.
Alternate part number DTS-5-LED LDS
Home : Stop and Go Lights
Traffic Signal Installation Instructions
Stop and Go Amperage Chart
Operate safely with a stop & go light. Red and green signals are immediately recognizable to reduce risk of accidents and increase efficiency in any business: open/closed.danger/safe.stop/go.wait/proceed
Use it to.
- Control entry to loading docks, carwashes,
water parks, hazmat areas, darkrooms
- Warn workers and drivers of hazardous situations
- Distinguish open/closed lanes at a bank drive-thru or
parking lot exit
- Drivers education classes
- And much more