Soft Frame Shelter

The Soft frame Dock Shelter offers an improvement on the traditional rigid frame style shelters with its unique foam cushion frame design. Rather than breaking or becoming irreparably bent when impacted by trailers, the foam sided dock shelter absorbs the impact and returns to its original position once the truck re-positions. The frame, High Density Foam Cushion, is built in three pieces and can be designed to accommodate sloped approaches and different projections. Interior is Illuminated through a fiber glass sheet mounted to the header frame top. Double stitched, pleated, spring steel reinforced curtains slide along the sides and top of trailers creating a tight seal around the outside, while leaving the full width of the trailer opening accessible.
Note: The Soft-Sided shelter does not allow as much illumination as the

• Foam filled side pads eliminate the need for steel bumper guards.
• Pressure treated lumber backing.
• 18" overall projection is standard for 4 ?" bumper projection.
• Coated polymer fabric face curtains have foam bead on inside edge, which conforms to trailer for better seal.
• Raked header prevents water collection on top.
• Wear face with guide stripe on bottom corners of face curtains absorb impact of lower trailer corners.
• Wind cord prevents head curtain from blowing out of position.
• Three overlapping wear pleats in corners absorb impact of sharp trailer edges.
• Foam-filled draft pads inside lower corners prevent air from entering;
• "NO STEP" safety logo permanently affixed.
• Angle trim secures face and header curtains to shelter frame.
• Durable fabrics in a wide range of weights, styles, and colors.
• Spring steel stays inside of head and side curtains. 

Note: If the shelter is incorrectly specified and/or misapplied for the application, not only will shelter be ineffective, but it may result in damage to the building and the Truck shelter. The TS Series requires a minimum height of 15'0" off grade.