The D2 holds a uniform D-shaped profile measuring 1-1/2" × 2" and is constructed of extruded EPDM rubber. EPDM is particularly well suited to outdoor applications due to its excellent resistance to weather, sunlight, ozone and water. It is used for a wide range of applications including loading docks, parking garages, marinas, vehicle and equipment protection, and industrial wall protection.
Note: EPDM has poor resistance to petroleum-based oils and fuels. Applications involving regular contact with gasoline, diesel, mineral oils or petroleum-based lubricants will shorten the product’s life span.
Benefits
- Installs easily — anchors through the face into the dock or wall
- Eliminates costly and unsightly damage to equipment, vehicles and structures
- One-piece construction
- Made in the USA
- 1 year warranty
D2 Engineering Specification
D2 — Architectural Spec
A. Manufacturer
1. Design is based on products manufactured by Durable Corporation, 75 North Pleasant Street, Norwalk, OH 44857.
2. Type: Loading dock bumper shall be a one-piece extruded EPDM rubber D-profile, black, cut to length, undrilled.
B. Product Characteristics
1. Product: Extruded Dock Bumper — Model D2.
2. Projection from wall or dock face: 1-1/2" (38 mm). Face height: 2" (51 mm). Length: as scheduled, in 12" increments to 10' (3,048 mm) maximum.
3. Drilling: undrilled; field drilled to match anchorage. Mounting holes 3/8"; access holes 3/4". Anchor bolt: 1/4" × 2".
4. Mounting bar: not applicable.
5. Material: EPDM rubber, durometer 70 ± 5; tensile strength 1,850 psi, elongation 220%; tear strength 229 lb/in (ASTM D 624); impact resistance 75% (ASTM D 2632).
6. Weight: approximately 1.4 lb per foot.
7. Color: black.
C. References
ASTM D 624 — Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers.
ASTM D 2632 — Standard Test Method for Rubber Property — Resilience by Vertical Rebound.
D. Submittals
Submit manufacturer’s data sheets including dimensional drawing with drill pattern, material data, and installation methods, under provisions of Section 01300.
E. Warranty
Durable Corporation warrants this bumper against defective workmanship and material for one (1) year from date of purchase. Product damage from unusual abuse, improper installation, or other external factors is not covered. Remedy is limited to a replacement bumper of the same specifications; Durable is not responsible for additional costs incurred, including installation.
Warranty
Durable Corporation Warranty Terms
Durable Corporation warrants the D2 against defective workmanship and material for one (1) year from date of purchase. Product damage from unusual abuse, improper installation, or other external factors is not covered. If a bumper is determined to be defective within the warranty period, Durable will provide a replacement bumper of the same specifications; Durable is not responsible for any additional costs incurred, including installation. Warranty claims are reviewed by Durable on a per-case basis — direct claims to us with documentation, including photos if available.
