Below is a chart of our Steel Faced Dock Bumpers.  Please click on the model number to view details about each dock bumper. 

NOTE: Steel faced dock bumpers are available in 9" thick pads with an overall 9 3/4" projection.  Other standard sizes are available.

FEATURES

• Available ability to deflect and absorb shock with standard laminated bumper beneath the steel-face.
• Comes in a wide variety of models, and can be mounted in various heights, from flush mount to 12" above dock, depending on highest impact area.

Material/Thickness

• Fabric reinforced pads cut from selected recycled truck tires.
• Standard pad thickness at 4 1/2" and 6" thick.  Heights at 6", 10", and 12"
• Steel-face is 3/8" thick, heavy-duty, high carbon steel that is mounted to standard laminated dock bumper.
• Also available in extra-thick sizes of 9", 10 1/2", and 12" projections.

Installation

• Structural mounting angles permit welded installations or provide bolting through steel.
• No assembly required.

Specifications

• Furnish and install Durable Steel-Face Dock Bumpers as manufactured by Durable Corporation, Norwalk, Ohio.  Model No(s)____.  Resilient rubber material cut to uniform size pads 4 1/2" thick with overall projection of 5 1/4". (other pad thickness available 6", 9", 10 1/2", and 12").  Punched to receive 3/4" supporting rods.
• Bumper to have 3/8" steel-face plate equal to the rubber surface dimensions.  Plate to be welded to two slotted steel support plates which extend back to the 3/4" supporting rods.  Brackets to be punched with elongated slots to allow steel-face to move on impact.
• Finish to be black only.

STEEL FACED DOCK BUMPERS

We offer Laminated Dock bumpers, Molded Bumpers, Extruded Bumpers, Dura-Soft Bumpers, Steel Faced Bumpers, and Extra-Length Bumpers.